Description
MMA and TIG electrode inverter welding machine
Maximum 180 A, with electrode door gripper and mass cable included.
ESAB Rogue ES 180i
Single-phase inverter inverter rogue 180i welding machine for use on domestic current (230 volts 50/60 Hz). Excellently welds Rutilic, basic, stainless, nickel, bronze etc electrodes, up to a 4.0 mm electrode diameter.
Robust and resistant welding machine, dedicated to professional welders is built to resist impact after impact, in the workshop or field thanks also to the practice shoulder strap.
The ESAB Rogue welding machine is durable and resistant to atmospheric agents, with an IP23S classification for use in difficult external applications.
Rogue ES 180i provides cutting-edge welding performance and maximum reliability thanks to a latest-generation high-performance electronics and digital control, guaranteeing a precise and constant arc. THEThe microprocessor inside accurately controls all functions and provides the best welding performance of the category, throughout the machine's amperage range.
Thanks to the adjustment panel it is possible to easily set the amperage required by the processing and choose the desired welding method: with MMA electrode or TIG LIFT.
Comes from:
- Welding machine
- Electrode door pliers with 3 meter cable and 50mm² connector
- Mass clampWith 3 meter cable and 50mm connector²
- Security manual
- Shoulder bag
- 3 year warranty
Arc Force
The strength function of the arch determines the variations of current depending on the variations in the length of the arc during welding. Use a value of the low arch force to get a stable arc with less drops and a high value to get a hot bow with greater excavation power.
The strength of the arc applies only to MMA welding.
Hot Start
The Hot Start function temporarily increases the current at the beginning of the welding.
Use this function to reduce the risk of insufficient fusion and accession and rubbing electrode. The Hot Start function only applies to MMA welding.
Live Tig-Start
This generator performs the Tig-Start live.
The tungsten electrode is held against the piece to be welded. When moving away from the piece, the arc is triggered to a low level current, then climb up to the user-preset amperage.
Thermal protection
The generator includes a thermal protection against overheating. In case of overheating, welding stops, the overheating indicator on the panel will turn on and the display will display an error message. The protection is reset automatically when the temperature reduces sufficiently.
Download the instruction booklet
The Rogue es 180i unit is designed and tested in compliance with the standards
International and Europeans EN60974-1 and EN60974-10. Upon completion of assistance or repair interventions, it is responsibility for the personnel who performs the job make sure that the product respects the requirements of the above rules.
|
|
|
|
|
Output voltage |
230 V ± 15% 1 ~ 50/60 Hz |
230 V ± 15% 1 ~ 50/60 Hz |
|
nominal kva |
8.7 kVA | 6.9 kVA |
|
nominal kw |
7 kW | 5.5 kW |
|
Primary |
||
|
THEmaxMma |
36 a |
30 A |
|
THEmaxLive tig |
24 A |
18.5 a |
|
RequestPower in the absence of loadIn energy saving mode |
30 W |
30 W |
|
Adjustment interval |
||
|
ELECTRODE |
20-180 a |
20-150 a |
|
Live tig |
10-180 a |
10-150 a |
|
Admissible loadMma |
||
|
20% work cycle |
170 A / 26.8 V |
|
|
25% hot weather |
150 A / 26 V |
|
|
60% hot welding time |
97 A / 23.9 V |
97 A / 23.9 V |
|
100% work cycle |
75 A / 23 V |
75 A / 23 V |
|
Admissible load inLive tig |
||
|
25% hot weather |
180 A / 17.2 V |
150 A / 16 V |
|
60% hot welding time |
116 A / 14.6 V |
97 A / 13.9 V |
|
100% work cycle |
90 A / 13.6 V |
75 A / 13 V |
|
Apparent power i2 to the maximum current |
8.7 kVA |
6.9 kVA |
|
Active power THE2 At the highest current |
5.5 kW |
4.35 kW |
|
Power factorto the maximum current |
||
|
Live tig |
0,63 |
0,63 |
|
ELECTRODE |
0,63 |
0,63 |
|
Efficiencyto the maximum current |
||
|
ELECTRODE |
89% |
89% |
|
Live tig |
89% |
89% |
|
Open circuit voltage, u0 max |
||
|
VRD 35 V Disabled |
63 V DC |
63 V DC |
|
VRD 35 V activated |
<30 V |
<30 V |
|
Operating temperature |
-10 a +40 ° C (+14 a 104 ° F) |
-10 a +40 ° C (+14 a 104 ° F) |
|
Temperature during transport |
From -20 to +55 ° C (from -4 to +131 ° F) |
From -20 to +55 ° C (from -4 to +131 ° F) |
|
Continuous sound pressure in the absence of load |
<70 dB |
<70 dB |
|
Dimensions, L x p x a |
403 × 153 × 264 mm (15,8 × 6 × 10.4 in the.) |
403 × 153 × 264 mm (15,8 × 6 × 10.4 in the.) |
|
Weight |
6.8 kg |
6.8 kg |
|
Transformer insulation class |
H |
H |
|
Protection class |
IP23S |
IP23S |
|
Application class |
S |
S |
Shipping (costs and times)
Payment methods
I tuoi pagamenti vengono processati in modo sicuro. Noi non conserveremo mai i tuoi dati personali di pagamento né abbiamo accesso alle informazioni della tua carta di credito/debito.